[수입판매] KEYENCE Full Spectrum Color Sensor LR-W500C

KEYENCE Full Spectrum Color Sensor LR-W500C , M12 connector type in LR-W series by KEYENCE America 키옌스 풀 스펙트럼 컬러 센서 신품 수입

​

Model				LR-W500C
Type				M12 connector 4-pin type
Detecting distance				30 to 500 mm
Min. spot diameter				Adjustable spot Approx. ø3.5 mm at 100 mm Approx. ø9 mm at 250 mm Approx. ø18 mm at 500 mm
Response time				200 µs/1 ms/10 ms/100 ms/500 ms selectable *1
Light source				White LED
Mutual interference reduction function				Up to 2 units when alternate frequencies set
Timer				OFF/ON delay/OFF delay/One-shot
Power supply	Power voltage			10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS
	Current consumption			65 mA or less (without load) at 24 VDC; 120 mA or less (without load) at 12 VDC *2
I/O	Control output			NPN open collector/PNP open collector selectable 30 VDC or less, 50 mA or less, remaining voltage: 2 V or less N.O./N.C. selectable *3
	External input			Tuning /Transmission OFF selectable Short circuit current: 1 mA or less for NPN/2 mA or less for PNP For the applied voltage, see the wiring diagrams in the instruction manual. For the input times, see the time charts in the instruction manual. *3
Protection circuit				Protection against reverse power connection, power supply surge, output overcurrent, output surge, and reverse output connection
Environmental resistance	Enclosure rating			IP65/IP67 (IEC60529)
	Ambient light			Incandescent lamp: 10,000 lux or less, Sunlight: 20,000 lux or less
	Ambient temperature			-20 to +50 °C (No freezing)
	Relative humidity			35 to 85 % RH (No condensation)
	Vibration resistance			10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
	Shock resistance			1,000 m/s2, 6 times in each of the X, Y, and Z directions
Material				Case: Zinc die cast (Nickel chrome plating), Indicator cover: PPSU, Buttons: PES Lens cover and display: PMMA (scratch-resistant coating), Spot adjustment dial: Iron (triiron tetraoxide coated) Connector ring: PMP, Connector socket: PEI
Weight				Approx. 110 g
*1 When alternate frequencies are set, the response time increases by approximately 20%. *2 195 mA or less (at 10 V, with load) *3 IO-Link: Specification v.1.1/COM2 (38.4 kbps) is supported. The setup file can be downloaded from KEYENCE website (http://www.keyence.com). If you are using the product in an environment in which you cannot download files over the Internet, contact your nearest KEYENCE office.

 

​​

​

​