[수입판매] Pepperl + Fuchs Thru-beam sensor LA29/LK29-Z-F1/31/116-SET 포토센서

 [수입판매] Pepperl + Fuchs Thru-beam sensor LA29/LK29-Z-F1/31/116-SET 포토센서

• 단일 빔 게이트 보호를 위한 견고하고 컴팩트한 광전 센서
• 매우 높은 감지 범위
• 모든 주파수에서 측정 가능한 방출 간섭 없음
• 에너지 절약형 램프를 사용해도 주변광에 민감하지 않음
• 조정 가능한 타이머 기능
• 전달 범위에 액세서리가 포함된 버전

제품 설명

Thru-beam sensor

System components
Emitter		LA29-F1/116
Receiver		LK29-Z-F1/31/116
General specifications
Effective detection range		0 ... 65 m
Threshold detection range		90 m
Light source		LED
Light type		modulated visible red light , 660 nm
Alignment aid		LED red (in receiver lens) illuminated constantly: beam is interrupted, flashes: reaching switching point, off: sufficient stability control
Transmitter frequency		F1 = 25 kHz
Diameter of the light spot		approx. 1.3 m at 65 m
Opening angle		Emitter 1.2°, Receiver 5°
Ambient light limit		50000 Lux
Functional safety related parameters
MTTFd		490 a
Mission Time (TM)		20 a
Diagnostic Coverage (DC)		0 %
Indicators/operating means
Operation indicator		LED green
Function indicator		LED yellow: 1. LED lit constantly: signal > 2 x switching point (function reserve) 2. LED flashes: signal between 1 x switching point and 2 x switching point 3. LED off: signal < switching point
Control elements		sensitivity adjustment (Adjustment to < 25% of the effective operating range) , Light-on/dark-on changeover switch
Electrical specifications
Operating voltage		12 ... 240 V AC/DC
Power consumption		≤ 3.5 VA
Output
Switching type		light/dark on, switchable . (selectable, light/dark switching is only activated if the receiver has 'dark on' selected.)
Signal output		Relay, 1 alternator
Switching voltage		max. 250 V AC/DC
Switching current		max. 2 A
Switching power		DC: max. 50 W AC: max. 500 VA
Switching frequency		25 Hz
Response time		20 ms
Timer function		ON delay (GAN), OFF delay (GAB), one shot (IAB), ON delay-OFF delay (GAN-GAB), programmable adjustment range 0.1 ...10 s

​

​

​