[수입판매] Pepperl + Fuchs Thru-beam sensor MLV41-LL-RT-IO/115/136 포토센서 화이바 센서
- 모든 조건에서 안정적인 작동을 위한 견고한 광섬유 센서
- 조정 가능한 연속 감도
- 퀵액션 클램핑 잠금 장치로 손쉬운 광섬유 설치
- 고품질 Delta Seal 코팅 처리된 알루미늄 하우징
- 서비스 및 프로세스 데이터용 IO-Link 인터페이스
| 제품 설명 | ||
| Robust fiber optic sensor for glass fiber optics, IO-Link interface, red light, push-pull output, fixed cable | ||
| General specifications | ||
| Sensor range | on black (6 %): up to 36 mm on Kodak white, reflection factor 90% up to 120 mm with LLR 04-1.6-0.5-WC3 fiberoptic cable | |
| Adjustment range | 0 ... 120 mm on Kodak white, reflection factor 90% | |
| Reference target | 100 mm x 100 mm on Kodak white, reflection factor 90% | |
| Light source | LED | |
| Light type | modulated visible red light , 660 nm | |
| Functional safety related parameters | ||
| MTTFd | 770 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| Operation indicator | LED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz) , IO link communication: green LED goes out briefly (1 Hz) | |
| Function indicator | LED yellow, lights up with receiver lit ; flashes when falling short of the stability control | |
| Control elements | sensitivity adjustment | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC | |
| Ripple | max. 10 % | |
| No-load supply current | max. 40 mA | |
| Interface | ||
| Interface type | IO-Link | |
| Protocol | IO-Link V1.0 | |
| Mode | COM2 (38.4 kBit/s) | |
| Output | ||
| Switching type | light/dark on | |
| Signal output | 2 push-pull (4 in 1) outputs, complementary, short-circuit proof, reverse polarity protected | |
| Switching voltage | max. 30 V DC | |
| Switching current | max. 100 mA | |
| Voltage drop | ≤ 2.5 V DC | |
| Switching frequency | 1000 Hz | |
| Response time | 0.5 ms | |
댓글 없음:
댓글 쓰기