[수입판매] Pepperl + Fuchs Thru-beam sensor SU18-16/40a/110/115/126a 포토센서 화이바 센서

 [수입판매] Pepperl + Fuchs Thru-beam sensor SU18-16/40a/110/115/126a 포토센서 화이바 센서

• DIN 레일 설치용 기본 라인
• 세련된 디자인
• 3가지 응답 시간 선택 가능
• 높은 스위칭 주파수
• 자기 진단 기능

제품 설명

Fiber optic sensor for glass fiber optics and plastic fiber optics

General specifications
Sensor range		up to 150 mm (KLR-C02-2,2-2,0-K146)
Detection range		up to 450 mm (KLE-C01-2,2-2,0-K116)
Light source		LED
Light type		modulated visible red light , 660 nm
Ambient light limit		10000 Lux
Functional safety related parameters
MTTFd		690 a
Mission Time (TM)		20 a
Diagnostic Coverage (DC)		0 %
Indicators/operating means
Operation indicator		LED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz)
Function indicator		LED yellow: static illumination switching state, flashes when falling short of the stability control
Control elements		Potentiometer for setting sensitivity slide switch 2 positions: light/dark switching slide switch 3 positions: timer function - timer off, on delay 40 ms, off-delay 40 ms slide switch 3 positions: operating mode - normal, high speed , high resolution
Electrical specifications
Operating voltage		10 ... 30 V DC
Ripple		10 %
No-load supply current		≤ 30 mA
Output
Stability alarm output		1 push-pull (4 in 1) output NPN/PNP , short-circuit protected
Switching type		light/dark on, switchable
Signal output		1 push-pull (4 in 1) output NPN/PNP , short-circuit protected
Switching voltage		max. 30 V DC
Switching current		max. 100 mA , resistive load
Voltage drop		≤ 2 V DC at 100 mA ; ≤ 0.7 V at 10 mA
Switching frequency		Standard mode: 3 kHz , High speed mode: 6 kHz , High resolution: 250 Hz
Response time		Standard mode: 160 µs , High speed mode: 80 µs , High resolution: 2 ms
Repeat accuracy		≤ 0.5 % of adjusted sensor range

​

​

​