[수입판매] PEPPERL & FUCHS Absolute rotary encoder ENA36HD-S10SA9-0413I42-RBD P&F 로터리 엔코더

 [수입판매] PEPPERL & FUCHS Absolute rotary encoder ENA36HD-S10SA9-0413I42-RBD P&F 로터리 엔코더

• Very small housing

• Analog interface

• 13 bit overall resolution

• Free of wear magnetic sampling

• High climatic resistance

General specifications
Detection type		magnetic sampling
Device type		Absolute rotary encoder
Measurement range		min. 0 ... 22.5 ° max. 65536 x 360 ° factory setting: 16 x 360"
Resolution		13 Bit
UL File Number		E223176 "For use in NFPA 79 Applications only" , if UL marking is marked on the product.
Functional safety related parameters
MTTFd		480 a at 40 °C
Mission Time (TM)		20 a
L10		10 E+8 revolutions
Diagnostic Coverage (DC)		0 %
Electrical specifications
Operating voltage		8 ... 32 V DC
Current consumption		typ. 20 mA (with current output)
Input 1
Input type		lower limit of measurement range
Signal voltage
	High	8 ... 32 V DC
Signal duration		min. 1 s
Input 2
Input type		upper limit of measurement range
Signal voltage
	High	8 ... 32 V DC
Signal duration		min. 1 s
Analog output
Output type		analog current output
Default setting		rising ramp at ccw rotation
Linearity error		≤ 0.15 %
Load resistor		max. 500 Ω
Connection
Connector		M12 connector, 5 pin
Standard conformity
Degree of protection		DIN EN 60529 , IP68 / IP69K
Climatic testing		DIN EN 60068-2-3, no moisture condensation
Emitted interference		EN 61000-6-4:2007
Noise immunity		EN 61000-6-2:2005
Shock resistance		DIN EN 60068-2-27, 200 g, 11 ms
Vibration resistance		DIN EN 60068-2-6, 30 g, 10 ... 1000 Hz
Approvals and certificates
UL approval		cULus Listed, General Purpose, Class 2 Power Source , if UL marking is marked on the product.
Ambient conditions
Operating temperature		-40 ... 85 °C (-40 ... 185 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Relative humidity		98 % , no moisture condensation
Mechanical specifications
Material
	Housing	Steel , corrosion-resistant
	Flange	Aluminum
	Shaft	Stainless steel
Mass		approx. 150 g
Rotational speed		max. 6000 min -1
Moment of inertia		30 gcm2
Starting torque		< 5 Ncm
Shaft load
	Axial	180 N
	Radial	180 N
Dimensions
	Length	56.5 mm
	Diameter	36.5 mm

​

​