M.E.T Co.,ltd ☏+82-42-934-8257

2022년 4월 8일

[수입판매] Fluke Networks MS2-TTK Network Analyzer Termination Test Kit 플루크

Fluke Networks MS2-TTK

Network Analyzer Termination Test Kit Ethernet/CATV/Phone, MicroScanner2 Series

Overview

For more than a decade, cabling installation and maintenance technicians have relied on MicroScanner to verify terminations and troubleshoot continuity faults. A lot has changed in the cabling world since the original MicroScanner was introduced. Industry economics require that installations be done fast and accurately with no callbacks. And converging voice, data and video technologies have given rise to new requirements for service testing and multimedia support. MicroScanner2 recognizes these trends and presents a much-needed revolution to the way testing is done. It streamlines every aspect of the verification job. From its time saving user interface and integrated multimedia support to its expanded service detection capabilities, MicroScanner2 gives technicians the power to perform their jobs faster and more accurate than ever.

Features

Coax connector for video and audio testing

Rubber holster enhances durability and grip

Digital toning is safe and effective on active networks

Length meter shows distance to termination, open, or short

PoE detection rules out insufficient power as source of problems

Detail mode gives you additional test status information

Wiremap adapter doubles as protective cap

Modular port accepts RJ45 and RJ11plugs

Oversized LCD is backlit for crystal clear results

Intuitive icons show what's at the far end of any cable (10/100/1000 switch, POTS service, short, cable ID)

Graphical wiremap shows type and locatio of fault (miswires, reversals, split pairs, shorts, breaks)

[수입판매] OKdo OTII-ARC-001 Qoitech Otii Power analyzer 전원 분석기

OKdo OTII-ARC-001

Otii Standard, Qoitech Otii Power analyzer, DC Power Source, Datalogger

Overview

Otii Standard:

Power supply, monitoring and analysis in one easy to use and feature-packed product, the Otii by Qoitech is the ultimate tool for any developer aiming to design highly energy efficient IoT projects. Otii includes the Otii Arc measurement unit and the Otii software for Ubuntu, Windows & mac OS, download. Please note this product comes with a lifetime subscription to the Otii Software. Connect Otii Arc and power your device directly to the DC input or battery connectors. It will act as both an up to 5V DC power supply and high-resolution voltage and current measurement unit. Otii software will give you real time measurements and generate statistics based on the entire data set or small subsections even during the recording process. You can record and compare the changes in energy consumption due to changes in your software and hardware in one and same Otii project. Share the data with team mates and suppliers.

Features:

Records currents, voltages and UART logs and displays them in real time as charts and interactive measurements and comparisons

Recordings synchronized with UART debug logs

Enables long continuous recordings, recording time limited only by computer storage

Sample rate of up to 4k samples per second.

Measurement range of 100nA-5A

Requires an external power supply if going beyond USB capabilities

***Note: If using a Yellow USB port or with a lightning symbol, often they can power up to 1500+mA without the need for an external power supply

Data + Power via USB. 2.1mm DC jack for external power

ADC subsystem measurements with differential measurement range of -81.9175 mV to 81.92 mV

Two Sense pins that can be used to compensate for voltage drop in cables or as extra voltage sensors

Monitor multiple projects and Otiis' from the same computer

Two General Purpose Inputs

Two General Purpose Output

Crop, down sample & share

Today, based on statistics, tighter calibration limits and updates in the firmware, we can proudly announce an update to the technical specification

The new accuracy for current measurements is ±(0.1% + 50nA) for currents below 19mA and ±(0.1% + 150uA) for higher currents

Previously we have stated ±(1% + 0.5uA) for current measurements and ±(1% + 10mV) for voltage measurements

Recommended for Basic Use:

IC Clips – these will fit into the Arc black and red outlets, which then connect to your device under test. You could use any standard banana plug style connectors though.

If available, use a Yellow USB port or one with a lightning symbol to increase the power supply limit from 500mA to 1500mA (sometimes, these ports can go up to 3Amps).

Recommended for Advanced Use:

If you are powering devices beyond USB power constraints and would like to interface with the 14 port header, then read on.

27W Switch Mode Power Supply – set this variable supply to 7.5 Volts and your Arc will be able to power the device under test well beyond the USB limitation.

SMD Clips and Through Hole Clips (Red / Black) – the 14 pin connector on the Arc has standard 2.54mm pitch, so you can use any female headers and crimps to make your leads to suit your project along with stranded wire for better flexibility.

USB Type A Female Breakout – this is a useful combination for USB device testing. The female connector can then be used with any Type A cable, which adapts to a Micro B or other popular USB variants. To enable Otii Arc to power 5V devices, in the projects settings menu, disable Current “Auto range”. This will unlock the main voltage from 4.55V to instead be 5V back on the “Supply” tab for your project setup.

[수입판매] B&K Precision 601B Tester 테스터

B&K Precision 601B

Tester, Battery, Handheld, SLA Battery Capacity Analyzer, 6V and 12V

Overview

The 600B and 601B Battery Capacity Analyzers address the need to test and maintain sealed lead acid (SLA) batteries used in backup power UPS, emergency lighting, fire alarms, security systems, and many other electrical systems. By quickly characterizing a battery’s response to a load resistance, these meters display the remaining battery capacity as an indicator of the battery’s health. Powered by the battery under test, both models support testing of 12 V storage type lead acid batteries. The 601B is also capable of testing 6 V batteries and displaying the internal resistance of the battery.

Features

Measure remaining battery storage capacity in just seconds

Easy-to-use interface

High quality, durable Kelvin clamps

Rubber buttons

Rugged housing with extruded aluminum case

Internal resistance measurement (601B only)