[수입판매] Pepperl + Fuchs Thru-beam sensor OBE1000-R3-SE0-P-L 포토센서

 [수입판매] Pepperl + Fuchs Thru-beam sensor OBE1000-R3-SE0-P-L 포토센서

• 초소형 하우징 디자인
• DuraBeam 레이저 센서 - 내구성이 뛰어나고 LED처럼 사용 가능
• 매우 협소한 공간 제약 조건에서 최대 장착 자유도를 위한 45° 케이블 아웃렛

제품 설명

Laser thru-beam sensor, ultra-small design with M3 mounting, 1000 mm detection range, dark on, NPN output, 2 m fixed cable

System components
Emitter		OBE10M-R3-S-P-L
Receiver		OBE1000-R3-E0-P-L
General specifications
Effective detection range		0 ... 1 m
Threshold detection range		1.5 m
Light source		laser diode
Light type		modulated visible red light , 680 nm
Laser nominal ratings
	Note	LASER LIGHT , DO NOT STARE INTO BEAM
	Laser class	1
	Wave length	680 nm
	Beam divergence	> 5 mrad
	Pulse length	approx. 2 µs
	Repetition rate	approx. 16.6 kHz
	max. pulse energy	9.5 nJ
Diameter of the light spot		approx. 3 mm at a distance of 1000 mm
Opening angle		approx. 0.5 °
Optical face		frontal
Ambient light limit		EN 60947-5-2 : 30000 Lux
Functional safety related parameters
MTTFd		806 a
Mission Time (TM)		20 a
Diagnostic Coverage (DC)		0 %
Indicators/operating means
Operation indicator		LED green, statically lit Power on , short-circuit : LED green flashing (approx. 4 Hz)
Function indicator		Receiver: LED yellow, lights up when light beam is free, flashes when falling short of the stability control ; OFF when light beam is interrupted
Electrical specifications
Operating voltage		12 ... 24 V
No-load supply current		Emitter: ≤ 10 mA Receiver: ≤ 8 mA
Protection class		III
Input
Test input		Test of switching function at 0 V
Switching threshold		Teach-In input
Output
Switching type		NO contact / dark on
Signal output		1 NPN output, short-circuit protected, reverse polarity protected, open collector
Switching voltage		max. 30 V DC
Switching current		max. 50 mA , resistive load
Voltage drop		≤ 1.5 V DC
Switching frequency		approx. 2 kHz
Response time		250 µs

​

​

​

[수입판매] Pepperl + Fuchs Thru-beam sensor M100/MV100-RT/76a/95/103 포토센서

 [수입판매] Pepperl + Fuchs Thru-beam sensor M100/MV100-RT/76a/95/103 포토센서

• 미니어처 디자인
• 사용하기 쉬움
• 매우 밝고 잘 보이는 광점
• 풀 메탈 스레드 마운팅
• 전원 켜짐 및 스위칭 상태에 대한 가시성이 높은 LED
• 주변광에 민감하지 않음

제품 설명

Thru-beam sensor, 10 m detection range, red light, light/dark on, DC version, PNP output, sensitivity adjuster, emitter switch-off, M8 plug

System components
Emitter		M100-RT/76a/95
Receiver		MV100-RT/95/103
General specifications
Effective detection range		0 ... 10 m
Threshold detection range		15 m
Light source		LED
Light type		modulated visible red light
Diameter of the light spot		approx. 1 m at a distance of 15 m
Opening angle		approx. 2 °
Optical face		frontal
Ambient light limit		EN 60947-5-2
Functional safety related parameters
MTTFd		860 a
Mission Time (TM)		20 a
Diagnostic Coverage (DC)		0 %
Indicators/operating means
Operation indicator		LED green: power on
Function indicator		Receiver: LED yellow, lights up when light beam is free, flashes when falling short of the operating reserve ; OFF when light beam is interrupted
Control elements		sensitivity adjustment
Control elements		Light-on/dark-on changeover switch
Electrical specifications
Operating voltage		10 ... 30 V DC
Ripple		max. 10 %
No-load supply current		Emitter: ≤ 15 mA Receiver: ≤ 8 mA
Input
Test input		emitter deactivation at +UB
Output
Switching type		The switching type of the sensor is adjustable. The default setting is: light-on
Signal output		1 PNP output, short-circuit protected, reverse polarity protected, open collector
Switching voltage		max. 30 V DC
Switching current		max. 100 mA , resistive load
Voltage drop		≤ 1.5 V DC
Switching frequency		1000 Hz
Response time		0.5 ms

​

​

​

[수입판매] Pepperl + Fuchs Thru-beam sensor M100/MV100-6090/102/115 포토센서

 [수입판매] Pepperl + Fuchs Thru-beam sensor M100/MV100-6090/102/115 포토센서

• 미니어처 디자인
• 사용하기 쉬움
• 매우 밝고 잘 보이는 광점
• 풀 메탈 스레드 마운팅
• 전원 켜짐 및 스위칭 상태에 대한 가시성이 높은 LED
• 주변광에 민감하지 않음

System components
Emitter		M100-6090/76b/115
Receiver		MV100-6090/102/115
General specifications
Effective detection range		0 ... 2.8 m
Threshold detection range		4 m
Light source		LED
Light type		modulated visible red light
Diameter of the light spot		approx. 0.3 m at a distance of 4 m
Opening angle		approx. 2 °
Optical face		frontal
Ambient light limit		EN 60947-5-2
Functional safety related parameters
MTTFd		860 a
Mission Time (TM)		20 a
Diagnostic Coverage (DC)		0 %
Indicators/operating means
Operation indicator		LED green: power on
Function indicator		Receiver: LED yellow, lights up when light beam is free, flashes when falling short of the operating reserve ; OFF when light beam is interrupted
Control elements		sensitivity adjustment
Control elements		Light-on/dark-on changeover switch
Electrical specifications
Operating voltage		10 ... 30 V DC
Ripple		max. 10 %
No-load supply current		Emitter: ≤ 15 mA Receiver: ≤ 8 mA
Input
Test input		emitter deactivation at 0 V
Output
Switching type		The switching type of the sensor is adjustable. The default setting is: light-on
Signal output		1 NPN output, short-circuit protected, reverse polarity protected, open collector
Switching voltage		max. 30 V DC
Switching current		max. 100 mA , resistive load
Voltage drop		≤ 1.5 V DC
Switching frequency		1000 Hz
Response time		0.5 ms

​

​

​

[수입판매] Pepperl + Fuchs Thru-beam sensor LA31/LK31/25/31/115 포토센서

 [수입판매] Pepperl + Fuchs Thru-beam sensor LA31/LK31/25/31/115 포토센서

• 표준 작업을 위한 비용 최적화 시리즈
• 가시성이 높은 LED
• 범용 전압용 버전
• 릴레이 출력
• 다양한 장착 옵션

제품 설명

Thru-beam sensor, 30 m detection range, red light, light on, AC/DC version, relais output, fixed cable

System components
Emitter		LA31/115
Receiver		LK31/25/31/115
General specifications
Effective detection range		0 ... 30 m
Threshold detection range		43 m
Light source		LED
Light type		modulated visible red light , 630 nm
Alignment aid		LED yellow: 1. LED illuminates: Sufficient light signal received, emitter and receiver alignment is correct 2. LED flashes: Reaching switching point 3. LED off: Light beam is interrupted or the alignment is out
Diameter of the light spot		approx. 800 mm at a distance of 30 m
Opening angle		Emitter: 0.5 ° , Receiver: 1.5 °
Ambient light limit		50000 Lux ; according EN 60947-5-2
Functional safety related parameters
MTTFd		620 a
Mission Time (TM)		20 a
Diagnostic Coverage (DC)		0 %
Indicators/operating means
Operation indicator		LED green: power on
Function indicator		LED yellow: 1. LED lit constantly: signal > 2 x switching point (function reserve) 2. LED flashes: signal between 1 x switching point and 2 x switching point 3. LED off: signal < switching point
Electrical specifications
Operating voltage		24 ... 240 V AC 12 ... 240 V DC
No-load supply current		Emitter: ≤ 20 mA Receiver: ≤ 20 mA
Power consumption		Emitter: ≤ 1 VA Receiver: ≤ 1 VA
Output
Switching type		light-on
Signal output		Relay, 1 alternator
Switching voltage		max. 250 V AC/DC
Switching current		max. 3 A
Switching power		DC: max. 150 W AC: max. 750 VA
Switching frequency		≤ 20 Hz
Response time		≤ 25 ms

​

​

​

[수입판매] Pepperl + Fuchs Thru-beam sensor GD18/GV18/73/120 포토센서

 [수입판매] Pepperl + Fuchs Thru-beam sensor GD18/GV18/73/120 포토센서

• 표준 애플리케이션을 위한 짧은 M18 플라스틱 하우징의 효율적인 라인
• 360° 가시성을 위한 4개의 LED 표시기
• 전면 광학면이 있는 버전
• 매우 높은 감지 범위
• DC 전압 버전

System components
Emitter		GD18/159
Receiver		GV18/73/120
General specifications
Effective detection range		0 ... 20 m
Threshold detection range		25 m
Light source		LED
Light type		modulated visible red light , 640 nm
Diameter of the light spot		approx. 1300 mm at 25 m
Opening angle		approx. 3 °
Optical face		frontal
Ambient light limit		30000 Lux
Functional safety related parameters
MTTFd		630 a
Mission Time (TM)		20 a
Diagnostic Coverage (DC)		0 %
Indicators/operating means
Operation indicator		LED green, statically lit Power on
Function indicator		Receiver: LED yellow, lights up when light beam is free, flashes when falling short of the stability control ; OFF when light beam is interrupted
Electrical specifications
Operating voltage		10 ... 30 V DC
No-load supply current		< 20 mA
Output
Switching type		light/dark on
Signal output		2 PNP, complementary, short-circuit protected, open collectors
Switching voltage		max. 30 V DC
Switching current		max. 100 mA
Voltage drop		≤ 1.5 V DC
Switching frequency		500 Hz
Response time		≤ 1 ms

​

​

​

[수입판매] Pepperl + Fuchs Thru-beam sensor GD18/GV18/115/120 포토센서

[수입판매] Pepperl + Fuchs Thru-beam sensor GD18/GV18/115/120 포토센서

• 표준 애플리케이션을 위한 짧은 M18 플라스틱 하우징의 효율적인 라인
• 360° 가시성을 위한 4개의 LED 표시기
• 전면 광학면이 있는 버전
• 매우 높은 감지 범위
• DC 전압 버전

System components
Emitter		GD18/115
Receiver		GV18/115/120
General specifications
Effective detection range		0 ... 20 m
Threshold detection range		25 m
Light source		LED
Light type		modulated visible red light , 640 nm
Diameter of the light spot		approx. 1300 mm at 25 m
Opening angle		approx. 3 °
Optical face		frontal
Ambient light limit		30000 Lux
Functional safety related parameters
MTTFd		630 a
Mission Time (TM)		20 a
Diagnostic Coverage (DC)		0 %
Indicators/operating means
Operation indicator		LED green, statically lit Power on
Function indicator		Receiver: LED yellow, lights up when light beam is free, flashes when falling short of the stability control ; OFF when light beam is interrupted
Electrical specifications
Operating voltage		10 ... 30 V DC
No-load supply current		< 20 mA
Output
Switching type		light/dark on
Signal output		2 PNP, complementary, short-circuit protected, open collectors
Switching voltage		max. 30 V DC
Switching current		max. 100 mA
Voltage drop		≤ 1.5 V DC
Switching frequency		500 Hz
Response time		≤ 1 ms

​

​

​