[수입판매] Pepperl + Fuchs Thru-beam sensor OBE1000-R2-SE0-P-L 포토센서

 [수입판매] Pepperl + Fuchs Thru-beam sensor OBE1000-R2-SE0-P-L 포토센서

• 초소형 하우징 디자인
• DuraBeam 레이저 센서 - 내구성이 뛰어나고 LED처럼 사용 가능
• 매우 협소한 공간 제약 조건에서 최대 장착 자유도를 위한 45° 케이블 아웃렛

제품 설명

Laser thru-beam sensor, ultra-small design with M2 mounting, 1000 mm detection range, dark on, NPN output, 2 m fixed cable

System components
Emitter		OBE10M-R2-S-P-L
Receiver		OBE1000-R2-E0-P-L
General specifications
Effective detection range		0 ... 1 m
Threshold detection range		1.5 m
Light source		laser diode
Light type		modulated visible red light , 680 nm
Laser nominal ratings
	Note	LASER LIGHT , DO NOT STARE INTO BEAM
	Laser class	1
	Wave length	680 nm
	Beam divergence	> 5 mrad
	Pulse length	approx. 2 µs
	Repetition rate	approx. 16.6 kHz
	max. pulse energy	9.5 nJ
Diameter of the light spot		approx. 3 mm at a distance of 1000 mm
Opening angle		approx. 0.5 °
Optical face		frontal
Ambient light limit		EN 60947-5-2 : 30000 Lux
Functional safety related parameters
MTTFd		806 a
Mission Time (TM)		20 a
Diagnostic Coverage (DC)		0 %
Indicators/operating means
Operation indicator		LED green, statically lit Power on , short-circuit : LED green flashing (approx. 4 Hz)
Function indicator		Receiver: LED yellow, lights up when light beam is free, flashes when falling short of the stability control ; OFF when light beam is interrupted
Electrical specifications
Operating voltage		12 ... 24 V
No-load supply current		Emitter: ≤ 10 mA Receiver: ≤ 8 mA
Protection class		III
Input
Test input		Test of switching function at 0 V
Switching threshold		Teach-In input
Output
Switching type		NO contact / dark on
Signal output		1 NPN output, short-circuit protected, reverse polarity protected, open collector
Switching voltage		max. 30 V DC
Switching current		max. 50 mA , resistive load
Voltage drop		≤ 1.5 V DC
Switching frequency		approx. 2 kHz
Response time		250 µs

​

​

​