[수입판매] Pepperl + Fuchs Thru-beam sensor OJ500-M1K-E23 포토센서 화이바 센서
- Light-on/Dark-on 매개변수화 가능
- 조정 가능한 센서 헤드
| 제품 설명 | ||
| Fiber optic sensor for glass fiber optics | ||
| General specifications | ||
| Sensor range | up to 100 mm (LMR 18-3,2-1,0-K4) | |
| Detection range | up to 600 mm (LME 18-2,3-0,5-K3) | |
| Light source | LED | |
| Light type | modulated infrared light | |
| Ambient light limit | 40000 Lux | |
| Temperature influence | ≤ 0.5 mm/K | |
| Indicators/operating means | ||
| Operation indicator | LED green | |
| Function indicator | LED yellow: switching state LED red: stability control (flashing) | |
| Control elements | programming switch: bright/dark changeover switch selection of the operating frequency selection of the switching frequency pulse extension stability control dynamic/static | |
| Control elements | Sensing range adjuster | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC | |
| Ripple | 10 % | |
| No-load supply current | ≤ 35 mA | |
| Output | ||
| Stability alarm output | 1 PNP, active when falling short of the stability control | |
| Switching type | light/dark on | |
| Signal output | 1 PNP output, short-circuit protected, reverse polarity protected, open collector | |
| Switching voltage | max. 30 V DC | |
| Switching current | ≤ 200 mA | |
| Switching frequency | ≤ 1.5 kHz / 200 Hz switchable | |
| Response time | ≤ 0.3 ms at 1.5 kHz ≤ 2.5 ms at 200 Hz | |
| Timer function | pulse extension 20 ms, switchable | |
댓글 없음:
댓글 쓰기