[수입판매] Pepperl + Fuchs Thru-beam sensor RL61-LL-IR-Z/115/136 포토센서 화이바 센서

- 특수 설계의 표준 작업을 위한 비용 최적화 시리즈
- 컴팩트한 디자인
- M30 스레드가 있는 입방형 하우징 디자인 덕분에 다양한 마운팅 옵션
- 360° 고가시성 LED
- 프로그래밍 가능한 ON 지연, OFF 지연 및 원샷 타이머
- 4-in-1 출력(push-pull)
- 적외선이 있는 버전
- 범용 광섬유 어댑터 키트 포함
| 제품 설명 | ||
| Fiber optic sensor | ||
| General specifications | ||
| Detection range | Dependent on fibers selected | |
| Light source | IRED | |
| Light type | modulated infrared light , 850 nm | |
| Ambient light limit | 5000 Lux ; according EN 60947-5-2 | |
| Indicators/operating means | ||
| Operation indicator | 2 LEDs green | |
| Function indicator | 2 LEDs yellow ON: object inside the sensing range OFF: object outside the sensing range | |
| Control elements | Light-on/dark-on changeover switch | |
| Control elements | Sensing range adjuster | |
| Control elements | Time adjuster ( 0 ... 50 ms ) | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC | |
| Ripple | 10 % | |
| No-load supply current | ≤ 35 mA | |
| Protection class | II , rated voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1 Output circuit basis insulation of input circuit according to EN 50178, rated insulation voltage 240 V AC | |
| Output | ||
| Switching type | light/dark on, switchable | |
| Signal output | 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected | |
| Switching voltage | max. 30 V DC | |
| Switching current | max. 100 mA | |
| Voltage drop | ≤ 2.5 V | |
| Switching frequency | 500 Hz | |
| Response time | ≤ 1 ms | |
| Timer function | DIP switch for selection of operating modes | |




댓글 없음:
댓글 쓰기