[수입판매] Pepperl + Fuchs Thru-beam sensor VL18LL-M/30/40a/118 포토센서 화이바 센서
- 원통형 M18 x 1의 강력한 금속 하우징
- 보호 등급 IP67
- 전환된 에너지 절약 램프를 사용해도 주변광에 민감하지 않음
- 다중 장치 설치 가능, 상호 간섭 없음(누화 없음)
- M12 플러그 연결
- 보호 등급 2
제품 설명 | ||
Fiber optic sensor for glass fiber optics |
General specifications | ||
Sensor range | up to 70 mm (LMR 18-3,2-1,0-K4) | |
Detection range | up to 300 mm (LME 18-2,3-0,5-K3) | |
Light source | LED, 650 nm visible red light | |
Light type | modulated visible red light | |
Opening angle | 26 ° | |
Optical face | frontal | |
Ambient light limit | 30000 Lux | |
Hysteresis | < 15 % | |
Functional safety related parameters | ||
MTTFd | 700 a | |
Mission Time (TM) | 20 a | |
Diagnostic Coverage (DC) | 0 % | |
Indicators/operating means | ||
Operation indicator | LED green, flashes in case of short-circuit | |
Function indicator | LED yellow, lights up with receiver lit | |
Control elements | Sensitivity adjuster, light/dark switch | |
Electrical specifications | ||
Operating voltage | 10 ... 30 V DC , class 2 | |
Ripple | 10 % | |
No-load supply current | < 35 mA | |
Protection class | II , rated voltage ≤ 50 V AC with pollution degree 1-2 according to IEC 60664-1 | |
Output | ||
Switching type | light/dark on, switchable | |
Signal output | 1 NPN output, short-circuit protected, reverse polarity protected, open collector | |
Switching voltage | 30 V DC | |
Switching current | max. 200 mA | |
Voltage drop | ≤ 2.5 V DC | |
Switching frequency | 500 Hz | |
Response time | 1 ms |
댓글 없음:
댓글 쓰기