[수입판매] Pepperl + Fuchs Thru-beam sensor SU19/82a/103/115 포토센서 화이바 센서
- 디스플레이가 있는 클래식 라인
- 빠른 티치인을 위한 AGC(Automatic Gain Control)
- 손쉬운 배선을 위한 갱 마운팅
- 투명성 인식
- 30µs 고속 모드
- 마스터 모듈
| 제품 설명 | ||
| Classic Series fiber optic sensor with display, master module, PNP output, fixed cable | ||
| General specifications | ||
| Sensor range | up to 150 mm (KLR-C02-2,2-2,0-K146) | |
| Detection range | up to 450 mm (KLE-C01-2,2-2,0-K116) | |
| Light source | LED | |
| Light type | modulated visible red light , 660 nm | |
| Ambient light limit | 10000 Lux | |
| Gang mounting | maximum 20 units | |
| Functional safety related parameters | ||
| MTTFd | 500 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| Operation indicator | Power on: static illumination , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz) | |
| Diagnostics indicator | 7-segment display | |
| Function indicator | LED yellow: static illumination switching state, flashes when falling short of the stability control | |
| Control elements | Button (Mode) for menu choice ; Button (Set) for Teach-In ; Button (Up/Down) for fine adjusting and parameterization | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC | |
| Ripple | 10 % | |
| No-load supply current | ≤ 30 mA | |
| Output | ||
| Stability alarm output | 1 PNP, short-circuit protected | |
| Switching type | light/dark on selectable programmable | |
| Signal output | 1 PNP, short-circuit protected | |
| Switching voltage | max. 30 V DC | |
| Switching current | max. 100 mA , resistive load | |
| Voltage drop | ≤ 2 V DC at 100 mA ; ≤ 0.7 V at 10 mA | |
| Switching frequency | High speed mode: 16 kHz , Standard mode: 3 kHz , High resolution: 250 Hz ~ 3 kHz (selection by the sensor), Automatic: 250 Hz , Glass mode: 250 Hz | |
| Response time | High speed mode: 30 µs , Standard mode: 160 µs , High resolution: 2 ms , Automatic: 160 µs ~ 2 ms (choice by the sensor), Glass mode: 2 ms | |
| Repeat accuracy | ≤ 0.5 % of adjusted sensor range | |
| Timer function | ON-delay, OFF-delay, one shot, pulse extension ; adjustable 0 ... 999 ms in 1 ms increments | |
댓글 없음:
댓글 쓰기